Toyota 22R Weber High Boost Supercharger Kit (CM-8500150-HB)
See description below for vehicle fitment.
Fits 1981-1995 22R 2.4L Engines.
High boost kit contains an extra idler pulley tension arm as well as an additional smaller supercharger pulley for more boost compared to the low boost kit. This kit comes with an intake manifold that will accommodate a Weber 38 carburetor (Not Included).
Download the 22R Camden Supercharger Kit Instruction Manual
This kit can also be used on a 20R engine if you use a head from an 81-84 22R or 22RE engine.
This will work with factory air conditioning.
Oil fittings and hardware not shown in image.
Dyno numbers can be seen here.
We suggest increasing your oil pressure with LC Engineering's Adjustable Oil Pump Bypass.
Includes the following:
- 2 x 3/8" NPT Allen Plug (CM-8701032)
- Straight Hose Brass Barb Fitting (CM-8012585)
- Camden Supercharger Nylock Pulley Nut (CM-8500350)
- Toyota Upper Radiator Hose (CM-8016024)
- Toyota 22R & 22RE Supercharger to Inlet Manifold Gasket (CM-8031010)
- 2 x Thermostat Housing Bolt (CM-8701033)
- 2 x 1/8" NPT Allen Plug (CM-8701030)
- 5 x Double Ended Stud (CM-8701014)
- 5 x Nylock Nut (CM-8701013)
- 2 x Bolt (CM-8701012)
- 5" Supercharger to Intake O-Ring (CM-8024505)
- Camden Supercharger Pulley Washer (CM-8500353)
- Toyota 22R & 22RE Intake Manifold to Block Gasket (CM-8031011)
- 2 x 1/4" NPT Allen Plug (CM-8701031)
- 2 x 19-23mm Double Ear Oetiker Clamp (CM-8012446)
- 2 x 12.5-15mm Double Ear Oetiker Clamp (CM-8012445)
- Weld On SAE Oil Return Fitting (CM-8012598)
- Toyota Supercharger Drive Belt (CM-8014520)
- 4.0" 6 Groove Camden Supercharger Pulley (PB-6CAM400)
- 3.5" 6 Groove Camden Supercharger Pulley (PB-6CAM350)
- Toyota 5" 22R Supercharger Unit (CM-8500107)
- Oil Return Fitting 45° Swivel Hose End Fitting (CM-8012555)
- 9 x Lock Washer (CM-8701011)
- 9 x Flat Washer (CM-8701010)
- 4 x Bolt (CM-8701009)
- Toyota 5" Supercharger Weber Inlet Manifold (CM-8500488)
- Supercharger Pulley Woodruff Key (CM-8500348)
- Toyota 6 Groove Water Pump Fan Spacer (CM-8500347-6)
- Toyota 6 Groove Main Drive Crank Pulley (CM-8500340-6)
- 6 Groove Tensioner Arm & Idler Pulley (CM-8500336-3)
- 6 Groove Tensioner Arm & Idler Pulley (CM-8500336-2)
- Toyota 22R Throttle Cable Bracket (CM-8500147)
- NPT Race Tee (CM-8012702)
- 2 x NPT Barb Straight Fitting (CM-8012703)
- Toyota 22R & 22RE Thermostat Housing (CM-8500520)
- 4 x 1/4" High Pressure Oil Feed Hose (CM-8601220)
- 4 x 5/16" Fuel Hose (CM-8601221)
- 4 x Flat Washer (CM-8701008)
- 4 x Supercharger Body Bolt (CM-8701007)
- 4 x Double Ended Stud (CM-8701006)
- 4 x Lock Washer (CM-8701005)
- 4 x Flat Washer (CM-8701004)
- 4 x Zinc Nut (CM-8701003)
- 4 x Allen Bolt (CM-8701002)
- 4 x Double Ended Stud (CM-8701001)
- 2 x 1/2" High Pressure Oil Return Hose (CM-8601222)
- Swivel Barb Straight Fitting (CM-8012701)
You save: $1171.10
| Stock 22R Horsepower Output: | |
|---|---|
| 2,500 rpm | 50 hp |
| 3,000 rpm | 62 hp |
| 3,500 rpm | 70 hp |
| 4,000 rpm | 80 hp |
| 4,500 rpm | 70 hp |
| 5,000 rpm | 62 hp |
| Supercharged 22R Horsepower Output: | |
|---|---|
| 2,500 rpm | 90 hp |
| 3,000 rpm | 105 hp |
| 3,500 rpm | 115 hp |
| 4,000 rpm | 125 hp |
| 4,500 rpm | 130 hp |
| 5,000 rpm | 138 hp |
| 5,000 rpm (w/ no muffler or catalytic converter) | 158 hp |
Fitment:
- 81 Corona
- 81-97 Hilux
- 81-84 Celica
- 91 Cressida
- 81-95 Pickup
- 84 4Runner
- 84-89 Land Cruiser II, Bundera
