Toyota 22R Holley Low Boost Supercharger Kit (CM-8500151-LB)
See description below for vehicle fitment.
Fits 1981-1995 22R 2.4L Engines.
This kit comes with an intake manifold that will accommodate a Holley 2300 carburetor (Not Included).
Download the 22R Camden Supercharger Kit Instruction Manual
This kit can also be used on a 20R engine if you use a head from an 81-84 22R or 22RE engine.
This will work with factory air conditioning.
Oil fittings and hardware not shown in image.
Dyno Numbers can be found here.
We suggest increasing your oil pressure with LC Engineering's Adjustable Oil Pump Bypass.
Includes the following:
- Toyota 22R 5" Supercharger Holley 2300 Inlet Manifold (CM-8500339)
- Toyota 22R & 22RE Supercharger to Inlet Manifold Gasket (CM-8031010)
- Thermostat Housing Bolt (CM-8701033)
- 1/8" NPT Allen Plug (CM-8701030)
- Double Ended Stud (CM-8701014)
- Nylock Nut (CM-8701013)
- Bolt (CM-8701012)
- Lock Washer (CM-8701011)
- Flat Washer (CM-8701010)
- Toyota Upper Radiator Hose (CM-8016024)
- Camden Supercharger Nylock Pulley Nut (CM-8500350)
- Flat Washer (CM-8701008)
- Toyota Supercharger Drive Belt (CM-8014520)
- 4.0" 6 Groove Camden Supercharger Pulley (PB-6CAM400)
- Toyota 5" 22R Supercharger Unit (CM-8500107)
- Oil Return Fitting 45° Swivel Hose End Fitting (CM-8012555)
- Toyota 22R & 22RE Intake Manifold to Block Gasket (CM-8031011)
- Camden Supercharger Pulley Washer (CM-8500353)
- 5" Supercharger to Intake O-Ring (CM-8024505)
- Straight Hose Brass Barb Fitting (CM-8012585)
- Bolt (CM-8701009)
- Supercharger Body Bolt (CM-8701007)
- Supercharger Pulley Woodruff Key (CM-8500348)
- Double Ended Stud (CM-8701006)
- Toyota 6 Groove Main Drive Crank Pulley (CM-8500340-6)
- 6 Groove Tensioner Arm & Idler Pulley (CM-8500336-2)
- Toyota 22R Throttle Cable Bracket (CM-8500147)
- NPT Race Tee (CM-8012702)
- NPT Barb Straight Fitting (CM-8012703)
- Toyota 22R & 22RE Thermostat Housing (CM-8500520)
- 1/4" High Pressure Oil Feed Hose (CM-8601220)
- Lock Washer (CM-8701005)
- Flat Washer (CM-8701004)
- 12.5-15mm Double Ear Oetiker Clamp (CM-8012445)
- Toyota 6 Groove Water Pump Fan Spacer (CM-8500347-6)
- Zinc Nut (CM-8701003)
- Allen Bolt (CM-8701002)
- Double Ended Stud (CM-8701001)
- 1/2" High Pressure Oil Return Hose (CM-8601222)
- 5/16" Fuel Hose (CM-8601221)
- Swivel Barb Straight Fitting (CM-8012701)
- Weld On SAE Oil Return Fitting (CM-8012598)
- 19-23mm Double Ear Oetiker Clamp (CM-8012446)
You save: $452.90
| Stock 22R Horsepower Output: | |
|---|---|
| 2,500 rpm | 50 hp |
| 3,000 rpm | 62 hp |
| 3,500 rpm | 70 hp |
| 4,000 rpm | 80 hp |
| 4,500 rpm | 70 hp |
| 5,000 rpm | 62 hp |
| Supercharged 22R Horsepower Output: | |
|---|---|
| 2,500 rpm | 90 hp |
| 3,000 rpm | 105 hp |
| 3,500 rpm | 115 hp |
| 4,000 rpm | 125 hp |
| 4,500 rpm | 130 hp |
| 5,000 rpm | 138 hp |
| 5,000 rpm (w/ no muffler or catalytic converter) | 158 hp |
Fitment:
- 81 Corona
- 81-97 Hilux
- 81-84 Celica
- 91 Cressida
- 81-95 Pickup
- 84 4Runner
- 84-89 Land Cruiser II, Bundera