Toyota 22R Weber Low Boost Supercharger Kit (CM-8500150-LB)
See description below for vehicle fitment.
Fits 1981-1995 22R 2.4L Engines.
This kit comes with an intake manifold that will accommodate a Weber 38 carburetor (Not Included).
Download the 22R Camden Supercharger Kit Instruction Manual
This kit can also be used on a 20R engine if you use a head from an 81-84 22R or 22RE engine.
This will work with factory air conditioning.
Oil fittings and hardware not shown in image.
Includes the following:
- 2 x 19-23mm Double Ear Oetiker Clamp (CM-8012446)
- 1/4" High Pressure Oil Feed Hose (CM-8601220)
- Toyota 22R & 22RE Thermostat Housing (CM-8500520)
- Toyota 5" Supercharger Weber Inlet Manifold (CM-8500488)
- NPT Barb Straight Fitting (CM-8012703)
- NPT Race Tee (CM-8012702)
- Toyota 22R Throttle Cable Bracket (CM-8500147)
- 6 Groove Tensioner Arm & Idler Pulley (CM-8500336-2)
- Toyota 6 Groove Main Drive Crank Pulley (CM-8500340-6)
- Double Ended Stud (CM-8701006)
- Lock Washer (CM-8701005)
- Flat Washer (CM-8701004)
- 2 x 12.5-15mm Double Ear Oetiker Clamp (CM-8012445)
- Weld On SAE Oil Return Fitting (CM-8012598)
- Swivel Barb Straight Fitting (CM-8012701)
- 5/16" Fuel Hose (CM-8601221)
- 1/2" High Pressure Oil Return Hose (CM-8601222)
- Double Ended Stud (CM-8701001)
- Allen Bolt (CM-8701002)
- Zinc Nut (CM-8701003)
- Toyota 6 Groove Water Pump Fan Spacer (CM-8500347-6)
- Supercharger Pulley Woodruff Key (CM-8500348)
- Supercharger Body Bolt (CM-8701007)
- Bolt (CM-8701009)
- Flat Washer (CM-8701010)
- Lock Washer (CM-8701011)
- Bolt (CM-8701012)
- Nylock Nut (CM-8701013)
- Double Ended Stud (CM-8701014)
- 1/8" NPT Allen Plug (CM-8701030)
- Thermostat Housing Bolt (CM-8701033)
- Toyota 22R & 22RE Supercharger to Inlet Manifold Gasket (CM-8031010)
- Toyota Upper Radiator Hose (CM-8016024)
- Camden Supercharger Nylock Pulley Nut (CM-8500350)
- Flat Washer (CM-8701008)
- Straight Hose Brass Barb Fitting (CM-8012585)
- 5" Supercharger to Intake O-Ring (CM-8024505)
- Camden Supercharger Pulley Washer (CM-8500353)
- Toyota 22R & 22RE Intake Manifold to Block Gasket (CM-8031011)
- Oil Return Fitting 45° Swivel Hose End Fitting (CM-8012555)
- Toyota 5" 22R Supercharger Unit (CM-8500107)
- 4.0" 6 Groove Camden Supercharger Pulley (PB-6CAM400)
- Toyota Supercharger Drive Belt (CM-8014520)
You save: $470.40
Stock 22R Horsepower Output: | |
---|---|
2,500 rpm | 50 hp |
3,000 rpm | 62 hp |
3,500 rpm | 70 hp |
4,000 rpm | 80 hp |
4,500 rpm | 70 hp |
5,000 rpm | 62 hp |
Supercharged 22R Horsepower Output: | |
---|---|
2,500 rpm | 90 hp |
3,000 rpm | 105 hp |
3,500 rpm | 115 hp |
4,000 rpm | 125 hp |
4,500 rpm | 130 hp |
5,000 rpm | 138 hp |
5,000 rpm (w/ no muffler or catalytic converter) | 158 hp |
Fitment:
- 81 Corona
- 81-97 Hilux
- 81-84 Celica
- 91 Cressida
- 81-95 Pickup
- 84 4Runner
- 84-89 Land Cruiser II, Bundera