Toyota 22R Holley High Boost Supercharger Kit (CM-8500151-HB)
See description below for vehicle fitment.
Fits 1981-1995 22R 2.4L Engines.
High boost kit contains an extra idler pulley tension arm as well as an additional smaller supercharger pulley for more boost compared to the low boost kit. This kit comes with an intake manifold that will accommodate a Holley 2300 carburetor (Not Included).
Download the 22R Camden Supercharger Kit Instruction Manual
This kit can also be used on a 20R engine if you use a head from an 81-84 22R or 22RE engine.
This will work with factory air conditioning.
Oil fittings and hardware not shown in image.
Dyno numbers can be seen here.
We suggest increasing your oil pressure with LC Engineering's Adjustable Oil Pump Bypass.
Includes the following:
- Toyota 22R 5" Supercharger Holley 2300 Inlet Manifold (CM-8500339)
- Toyota 22R & 22RE Thermostat Housing (CM-8500520)
- NPT Barb Straight Fitting (CM-8012703)
- NPT Race Tee (CM-8012702)
- Toyota 22R Throttle Cable Bracket (CM-8500147)
- 6 Groove Tensioner Arm & Idler Pulley (CM-8500336-2)
- 6 Groove Tensioner Arm & Idler Pulley (CM-8500336-3)
- Toyota 6 Groove Main Drive Crank Pulley (CM-8500340-6)
- Toyota 6 Groove Water Pump Fan Spacer (CM-8500347-6)
- Supercharger Pulley Woodruff Key (CM-8500348)
- 1/4" High Pressure Oil Feed Hose (CM-8601220)
- 5/16" Fuel Hose (CM-8601221)
- Flat Washer (CM-8701008)
- Swivel Barb Straight Fitting (CM-8012701)
- 1/2" High Pressure Oil Return Hose (CM-8601222)
- Double Ended Stud (CM-8701001)
- Allen Bolt (CM-8701002)
- Zinc Nut (CM-8701003)
- Flat Washer (CM-8701004)
- Lock Washer (CM-8701005)
- Double Ended Stud (CM-8701006)
- Supercharger Body Bolt (CM-8701007)
- Bolt (CM-8701009)
- Flat Washer (CM-8701010)
- Lock Washer (CM-8701011)
- Bolt (CM-8701012)
- Nylock Nut (CM-8701013)
- Double Ended Stud (CM-8701014)
- 1/8" NPT Allen Plug (CM-8701030)
- Thermostat Housing Bolt (CM-8701033)
- Toyota 22R & 22RE Supercharger to Inlet Manifold Gasket (CM-8031010)
- Toyota Upper Radiator Hose (CM-8016024)
- Camden Supercharger Nylock Pulley Nut (CM-8500350)
- Straight Hose Brass Barb Fitting (CM-8012585)
- 5" Supercharger to Intake O-Ring (CM-8024505)
- Camden Supercharger Pulley Washer (CM-8500353)
- Toyota 22R & 22RE Intake Manifold to Block Gasket (CM-8031011)
- Oil Return Fitting 45° Swivel Hose End Fitting (CM-8012555)
- Toyota 5" 22R Supercharger Unit (CM-8500107)
- 3.5" 6 Groove Camden Supercharger Pulley (PB-6CAM350)
- 4.0" 6 Groove Camden Supercharger Pulley (PB-6CAM400)
- Toyota Supercharger Drive Belt (CM-8014520)
- Weld On SAE Oil Return Fitting (CM-8012598)
- 12.5-15mm Double Ear Oetiker Clamp (CM-8012445)
- 19-23mm Double Ear Oetiker Clamp (CM-8012446)
- 1/4" NPT Allen Plug (CM-8701031)
- 3/8" NPT Allen Plug (CM-8701032)
You save: $719.55
| Stock 22R Horsepower Output: | |
|---|---|
| 2,500 rpm | 50 hp |
| 3,000 rpm | 62 hp |
| 3,500 rpm | 70 hp |
| 4,000 rpm | 80 hp |
| 4,500 rpm | 70 hp |
| 5,000 rpm | 62 hp |
| Supercharged 22R Horsepower Output: | |
|---|---|
| 2,500 rpm | 90 hp |
| 3,000 rpm | 105 hp |
| 3,500 rpm | 115 hp |
| 4,000 rpm | 125 hp |
| 4,500 rpm | 130 hp |
| 5,000 rpm | 138 hp |
| 5,000 rpm (w/ no muffler or catalytic converter) | 158 hp |
Fitment:
- 81 Corona
- 81-97 Hilux
- 81-84 Celica
- 91 Cressida
- 81-95 Pickup
- 84 4Runner
- 84-89 Land Cruiser II, Bundera